Netherlands - Venlo
In mid-September, RSS installed permanent fencing on the building of the Regional Fire Service for northern and
central Limburg. According to Messrs Stultiens…
The
Netherlands - Nijmegen
Roofing contractors Gommers have started work on a major renovation
of approx. 7,500 m2 of
corrugated sheet on a student housing complex…
Belgium – Tessenderlo
Roofing contractor Wouters has been using the RSS edge protection system for sloping roofs for three months now. This is a two-man business…
The Netherlands - Houten
Dormer windows supplier, Ruiter Dakkapellen in Ursem, is the market
leader and dormer window specialist in the Netherlands. Recently they
had to…
Germany - Dortmund
In June 2007, Dirk Böcker, director of Böcker GmbH in Dortmund, bought 24 metres of RSS roof edge protection for sloping roofs. The…
België - Wellen
ANL Plastics develops thermo-formed plastic packaging made to measure. While this is mostly packaging for the food industry, the company also produces toys…
Nederland - Sittard
Roofing contractors, Frans Smeets Dakdekkersbedrijf, carried out a
major renovation project with the edge protection system from RSS.
"Building it up was really…
The Netherlands - Amsterdam
Safety
has been improved in Amsterdam
too thanks to Roof Safety Systems. To allow
technicians and maintenance personnel to work on the…
Belgium - Zoersel
Roofing contractor Frans Corvers in Vorstlaakdal has started restoration of the slate roof of a former convent on behalf of Aannemersbedrijf Van Hout…
The Netherlands - Tegelen
"We always used scaffolding in the past,” says John van den Bogaard from roofing contractors D&B Tegelen. "That always caused problems. We…
Roof Safety Systems stands for safety. All systems meet the lifting regulations (25 kg) and are certified by Aboma + Keboma. Roofs Safety Systems recently received certification to the EN 13374
Class C safety standards. This is Europe’s highest standard for fall
protection systems. Watch the videos of the safety tests below.
Safety tests
During the test, a roll of one metre in width with a diameter of 35 cm
and weighing 75 kg is rolled against the edge protection system from a
sloping roof of 60º with a fall height of 5 metres. Because of the
slope angle and the fall height from the roof, the weight impacts the
system at high speed and with very great force. The test is carried out
several times against different components of the system. The edge
protection system must withstand this loading. It simulates a person
falling from a height of 5 metres.
Safety tests